NurtureMax Infant Car Seat

The following product weight is an estimate and may vary slightly depending on the specific fashion and trim of your car seat. Infant carrier + base = 8.4 lb; Infant carrier alone = 5.3 lb

This car seat has a 6 year expiration from the date of manufacture. The specific expiration date is listed on the date and model label on the product. Safety standards change over time as restraint technology develops. Expiration dates help ensure that old products are eventually removed from circulation, so all children can benefit from improvements.

You can find the date of manufacture, model name and model number on a label found under the infant carrier and on the base..

Generally, most Evenflo car seats allow approximately 20% of the bottom of the car seat to hang over the front of the vehicle seat. The majority of the bottom of the car seat (80%) should be supported by the vehicle seat. This applies whether the car seat is installed rear-facing, forward-facing or in booster mode, and whether installed with the vehicle seat belt or the lower anchor system.

In some minivans with optional second row center seats, you may find that the car seat bottom actually overhangs the side of the vehicle seat. In this situation, the same general guidance above applies - at least 80% of the bottom of the car seat must be supported by the vehicle seat.

Firmly grip the car seat near the belt path opening, which is where you have it installed. Try to move the car seat side to side and front to back. The car seat should not move more than one inch (2.5 cm). If it moves more than one inch at the belt path, try your installation again. If it still moves more than one inch you may need to change seating positions in your vehicle or try a different installation method.