Shyft DualRide

Yes, a removable cupholder is included to use by the adult in stroller mode ONLY.

If you plan to use the ShyftTM DualRideTM on an aircraft for a child that is less than 2 years old, you must purchase a ticket for your child. You should contact the airline prior to departure to make sure the car seat requirements for use on an aircraft, provided in your user guide, will be met.

If the wheels of your ShyftTM DualRideTM aren’t turning, double-check that both rear wheel brakes have been disengaged. To release the brake, lift up the brake pedal for each rear wheel. For safety, ALWAYS make sure both brakes are fully engaged when placing your child in or removing your child from the car seat.

Flammability testing of car seats is required under the FMVSS 302, Flammability of Interior Materials Standard. The test measures the rate of flame spread with the goal of maximizing the amount of time a caregiver would have to remove an occupant from the car seat in the event of a vehicle fire. Evenflo’s car seats are tested by an accredited independent testing laboratory and meet the FMVSS 302 standard. In addition, Evenflo car seats are tested for toxicity to meet or exceed the regulations of various state and federal child products banned substances laws and regulations.

Yes. You may fold or unfold the stroller wheels of the Shyft™ DualRide™ while your infant is securely harnessed in the car seat. For additional details on how to fold and unfold the stroller wheels, be sure to watch our handy How To videos on https://youtu.be/3H1gKTRtqog (or on the DualRide™ product page at www.evenflo.com).

Yes, the Evenflo Shyft™ DualRide™ can be used in any forward-facing vehicle seating position allowed in your vehicle’s owner’s manual, as long as a tight installation can be achieved. Therefore, the center seating position may be an option. However, in some vehicles, the center seating position may be narrower which could make it more difficult to tightly install your car seat. In many vehicles, the center seating position may not allow installation with lower anchors. It is important to refer to both your vehicle owner's manual and your car seat user guide for full installation details.

Plastic components may be wiped clean with warm water and mild soap. Take care not to soak the product usage labels.

The Evenflo ShyftTM DualRideTM has been designed to fit a wide range of children. The information provided in the table below should help you determine if it is the right fit for your child. Rear-facing weight range: 3 - 35 lb. (1.4 – 15.8 kg) Rear-facing height range: 15.7 - 32 in (40 - 81 cm) Rear-facing minimum age: birthLowest harness position (with infant insert): 4.5 in (11.4 cm) Highest harness position: 11.5 in (29.2 cm)Inner buckle position: 3 in (7.6 cm)Middle buckle position: 4 in (10.2 cm)Outer buckle position: 5 in (12.7 cm)

There are many factors to consider when determining whether a specific car seat will fit in your vehicle. Your best option is to test the car seat in your vehicle before you make the purchase. It's always worth asking for this option at your local retailer. If you're not able to try the car seat in your vehicle, we've provided some basic dimensions below. Please note: the dimensions of your car seat and your vehicle's back seat alone will not give you the full picture. There are many thousands of combinations of vehicle makes, models, car seat configurations, vehicle seat belt designs, and seat cushion shapes. The easiest way to determine whether your car seat is suitable for a particular seating position is to check for a tight installation. Width at widest point: 18.8 in (47.8 cm)Depth: 26 in (66 cm)Height: 27.5 in (69.9 cm)

The Evenflo ShyftTM DualRideTM has a 6-year expiration from the date of manufacture. The specific expiration date is listed on the date and model label on the product.

You can find the date of manufacture, model name, and model number on two labels on the Evenflo ShyftTM DualRideTM. One is found on the underside of the infant carrier. The second label is on the underside of the base.

The ShyftTM DualRideTM weighs a total of 28 lb (12.7 kg) with all the components combined, including the infant carrier, stroller frame, and base. In stroller mode, or in carrier mode with the stroller frame attached, the product weighs approximately 19 lb (8.6 kg). When used as an infant carrier without the stroller frame, the product weighs approximately 8 lb (3.6 kg).

The Shyft DualRide is a little bit heavier than most infant car seats — but for a good reason! It’s designed to function as a one-piece combo: an infant car seat that opens into a stroller with the wheels and frame already attached. After removing from the base, just squeeze the release on the infant car seat and the stroller wheels drop down, which makes transitioning from the backseat of your vehicle to the sidewalk or driveway seamless. Thanks to this integrated stroller system, you won’t need to carry the infant car seat often. However, the ShyftTM DualRideTM may also be removed from the base without the stroller frame attached, for a lightweight carry option.